The Original Gel Plate · Est. 2011 · Made in the USANew: Holiday Card & Ornament Kit · $43.99Your Printmaking Journey · Fall Edition on now · enroll anytime
DIY Clay Ornaments
Grades 5 to 8
Classroom lesson plan

DIY Clay Ornaments

with Marsha Valk
TechniqueGel printing
You’ll makeDIY Clay Ornaments
LevelGrades 5–8
Objectives

Students will be able to

  • form egg shapes with the use of clay
  • master clay using it to create egg ornaments
  • comprehends color theory by using limited (pastel) colors
  • create ornaments
Essential questions

Ask the room

  • How can clay be used to create ornaments?
  • What type of designs can be implemented into clay ornaments?
Materials for DIY Clay Ornaments
Materials13 items
Step by step

Procedure

Step 1: Roll the air-drying clay out until it’s about 1/8 inch thick
1

Roll the air-drying clay out until it’s about 1/8 inch thick. Move the clay to a non-stick surface like a sheet of baking parchment or a smooth ceramic tile.

Step 2: Use a clay or cookie cutter to cut shapes. Please don’t use
2

Use a clay or cookie cutter to cut shapes. Please don’t use the cookie cutter for edibles after you’ve used it on clay.

Step 3: Smooth the edges of the clay shapes by running a wet finger
3

Smooth the edges of the clay shapes by running a wet finger along them.

Step 4: Poke a hole at the top of each shape using a drinking straw
4

Poke a hole at the top of each shape using a drinking straw or a small tube.

5

Leave the clay shapes to dry. Drying time can take several hours to several days depending on the climate. Check regularly to ensure they dry as flat as possible. If the shapes do warp, you can easily flatten them by pushing them down with a flat hand or by placing something like a smooth ceramic tile on top.

Step 6: As soon as the clay is dry, you can start printing! You can
6

As soon as the clay is dry, you can start printing! You can use all of your favorite mark making tools and methods on the gel printing plate of your choice. The size of the plate depends on how many shapes you’d like to print on in one go. You can print on both sides of the clay shape. I chose to work with the 5”x7” Gelli Arts® gel printing plate because I could fit my clay shape on there twice. So if I wanted I could print the front and the back of the shape with the same layer of paint from my plate. My clay shapes are only 3” tall, so I specifically looked for stencils that have patterns to fit that small scale. Use tissue paper to lift paint from the plate. You can carefully clean your brayer on the same paper too. Keep the tissue paper aside to use for collage later on. Keep layering the prints on the clay shapes until you are happy with the results.

Step 7: Dab a drop of paint on a cosmetic sponge and run it along th
7

Dab a drop of paint on a cosmetic sponge and run it along the edges of the clay shapes if you’d like to get rid of the white clay trim. Use matte medium or decoupage glue to collage snippets of your tissue paper onto the clay shapes. The thin paper will add more layers to the clay shapes without adding any bulk. The adhesive will turn the white tissue almost transparent, and the collaged pieces will blend with the gel printed background. Another way you can adorn your mixed media ornaments is with paint pen markers and doodles.

Step 8: Finish your mixed media ornaments by threading a pretty coor
8

Finish your mixed media ornaments by threading a pretty coordinating ribbon through the holes!

From Marsha Valk’s prints

Lesson plan by Marsha Valk for Gelli Arts®. Photos from Marsha Valk’s clay ornaments post on the Gelli Arts® blog.

The course

Your Printmaking Journey · Fall Edition

Tania AhmedKim BloombergPhoebe GanderKim HerringeSusan CliftonJessica Russo ScherrGiovanna ZaraMary Beth ShawMaren OatesRobyn McClendonBirgit KoopsenJulia WoningStewart Taylor
13classes, six weeks

October 18 to November 28, 2026

13 artists teaching on video, lifetime access. $199, enroll anytime.

See the course