The Original Gel Plate · Est. 2011 · Made in the USANew: Holiday Card & Ornament Kit · $43.99Your Printmaking Journey · Fall Edition on now · enroll anytime
Marsha's series of small layered monoprints with arches and rings
From the Gelli Arts® blog

Opaque + Transparent Layers

with Marsha Valk
TechniqueGel printing with opaque and transparent paint
You’ll makeA series of small layered monoprints
LevelAll levels
Marsha's series of small layered monoprints with arches and ringsWatch
From the artist

Hi there! It’s Marsha here today sharing a series of small monoprints printed with opaque as well as transparent paint colours. Have you ever wondered what the little square icons on your paint tubes mean?

Supply list
Marsha's materials laid out: a print, the plate, a roller, paints and her paper masks

These squares tell you all about the opacity level of the paint colour.

There are four types:

□ transparent

⧄ semi-transparent

◪ semi-opaque

■ opaque

Not every brand uses the squares, however most professional and student-grade paints have some kind of indicator that tells you the type of opacity level you’re dealing with.

The opacity of a paint can have a huge impact on the outcome of a layered print! So it’s worth noting if it’s a transparent or an opaque colour before you roll it out on your Gelli Arts® gel printing plate.

In general you can say that opaque colours cover whatever’s underneath while transparent colours will only create sheer layers on top of it.

Opaque colours give good results on both white and coloured paper.

Be mindful that some opaque colours may not provide complete coverage in just one layer, especially not when printing light over dark.

Think of it like painting a red wall white. You will probably end up with a pinkish colour first!

The opacity of a paint can have a huge impact on the outcome of a layered print!

As transparent colours are see-though, they give the brightest results on white or light paper.

When gel printing transparent layers you always have to take the colour you want to print on top of into account, because it will always shine through.

So, when your first layer is red and you want to print transparent yellow over it, the overlapping parts will turn out orange.

You can use this characteristic to your advantage: if a part of your print is too yellow, you can change the colour easily with just a sheer layer of transparent paint. Much like a glaze!

A colour wheel can be a handy tool to figure out what to expect when transparent colours mix or overlap.

Please share your gel prints on Instagram using #gelliarts and #gelliartsmade. We love to see your work!

Have lots of fun experimenting with transparent and opaque colours!

Marsha.

13video classes

Like this project? Take the course.

Your Printmaking Journey · Fall Edition: 13 artists, six weeks, lifetime access. Started October 18. $199, enroll anytime.

See the course
Shop this project

Everything from the store in this lesson

The two Gelli Arts® items Marsha uses, $32.98 all in.

Add all 2 to cart

Project and photography by Marsha Valk for Gelli Arts®. First published on the Gelli Arts® blog in April 2020.

The course

Your Printmaking Journey · Fall Edition

Tania AhmedKim BloombergPhoebe GanderKim HerringeSusan CliftonJessica Russo ScherrGiovanna ZaraMary Beth ShawMaren OatesRobyn McClendonBirgit KoopsenJulia WoningStewart Taylor
13classes, six weeks

October 18 to November 28, 2026

13 artists teaching on video, lifetime access. $199, enroll anytime.

See the course
Shop this project$32.98See the kit