The Original Gel Plate · Est. 2011 · Made in the USANew: Holiday Card & Ornament Kit · $43.99Your Printmaking Journey · Fall Edition on now · enroll anytime
Making Tissue Paper Window Hearts
From the Gelli Arts® blog

Tissue Paper Window Hearts

with Julie Anderson
TechniqueGel printing
You’ll makeTissue paper hearts to hang in a window
LevelAll levels
Making Tissue Paper Window HeartsWatch
From the artist

Here’s a great way to make a sweet valentine to hang in the window using your gel pad, tissue paper, wire and beeswax. You can make several for an installation piece, or give them away to friends and family one at a time. Please post anything you make on Instagram and tag me at @juliejulieart!

Supply list
Step-by-step

Follow along

1. You can use one Gelli Plate at a time for this project. If you’re using more than one Gelli Plate, remove the plastic sheets from both sides of the Gelliplates and tape down the bottom plastic sheets to the table. Then put the gel pads on top, so they are right next to each other.
  1. You can use one Gelli Plate at a time for this project. If you’re using more than one Gelli Plate, remove the plastic sheets from both sides of the Gelliplates and tape down the bottom plastic sheets to the table. Then put the gel pads on top, so they are right next to each other.
1. You can use one Gelli Plate at a time for this project. If you’re using more than one Gelli Plate, remove the plastic sheets from both sides of the Gelliplates and tape down the bottom plastic sheets to the table. Then put the gel pads on top, so they are right next to each other.1. You can use one Gelli Plate at a time for this project. If you’re using more than one Gelli Plate, remove the plastic sheets from both sides of the Gelliplates and tape down the bottom plastic sheets to the table. Then put the gel pads on top, so they are right next to each other.
2. Gather tissue paper, paint, and anything you like to use for mark making. I cut stencils out of canvas, and use ribbon and string.
  1. Gather tissue paper, paint, and anything you like to use for mark making. I cut stencils out of canvas, and use ribbon and string.
3. Roll out paint and lay down mark making objects. I’ve used red and purple paint for this project.
  1. Roll out paint and lay down mark making objects. I’ve used red and purple paint for this project.
4. Take up the first layer of paint on tissue paper (or regular paper if you like) knowing that it’s not necessarily going to be used for your final hearts and circles. You might like it, or you may want to save it for another project. The magic usually happens with the second pull.
  1. Take up the first layer of paint on tissue paper (or regular paper if you like) knowing that it’s not necessarily going to be used for your final hearts and circles. You might like it, or you may want to save it for another project. The magic usually happens with the second pull.
5. Remove all the things! You’ll need to work rather quickly so the paint doesn’t dry, because tissue paper is more fragile than regular copy paper. If the paper sticks, clean off your gelli pad and add a small amount of gloss gel medium to the surface, roll it out, and then add paint.
  1. Remove all the things! You’ll need to work rather quickly so the paint doesn’t dry, because tissue paper is more fragile than regular copy paper. If the paper sticks, clean off your gelli pad and add a small amount of gloss gel medium to the surface, roll it out, and then add paint.
5. Remove all the things! You’ll need to work rather quickly so the paint doesn’t dry, because tissue paper is more fragile than regular copy paper. If the paper sticks, clean off your gelli pad and add a small amount of gloss gel medium to the surface, roll it out, and then add paint.
6. Place the tissue paper on top of the gelli pad and press it in gently with the palm of your hands. Remember to work quickly! Then grab one end of the paper and carefully pull it up.
  1. Place the tissue paper on top of the gelli pad and press it in gently with the palm of your hands. Remember to work quickly! Then grab one end of the paper and carefully pull it up.
7. Repeat steps 3-6 adding more layers of color, as you like. Let the paper dry a bit before you pull another layer of color. I like to work on several pieces of paper at a time so they have time to dry between colors.
  1. Repeat steps 3-6 adding more layers of color, as you like. Let the paper dry a bit before you pull another layer of color. I like to work on several pieces of paper at a time so they have time to dry between colors.
8. Pull out a desired length of wire to make circles and hearts. Create a small twist/loop at the top of the wire or heart to use for threading wire or ribbon through to hang later.
  1. Pull out a desired length of wire to make circles and hearts. Create a small twist/loop at the top of the wire or heart to use for threading wire or ribbon through to hang later.
8. Pull out a desired length of wire to make circles and hearts. Create a small twist/loop at the top of the wire or heart to use for threading wire or ribbon through to hang later.
9. Glue circles onto the paper. Remember to flip the “good side” of the paper over, and glue the wire shapes onto the backside of the paper.
  1. Glue circles onto the paper. Remember to flip the “good side” of the paper over, and glue the wire shapes onto the backside of the paper.
10. After the glue dries, cut out the shapes, leaving about ¼” of space around the wires. Once the paper is dipped in the wax, you’ll roll that extra paper back over the wire to help secure it.
  1. After the glue dries, cut out the shapes, leaving about ¼” of space around the wires. Once the paper is dipped in the wax, you’ll roll that extra paper back over the wire to help secure it.
11. Melt wax in an electric frying pan, in a safe place, away from all the paper. Please be careful, and keep hot wax away from children and pets. Also, if you’re doing this outside on a sunny day, the bees will find you, and they will not be happy! A 1lb block melted makes it easier to dip the wire circles, and will be enough for about 50 circles.
  1. Melt wax in an electric frying pan, in a safe place, away from all the paper. Please be careful, and keep hot wax away from children and pets. Also, if you’re doing this outside on a sunny day, the bees will find you, and they will not be happy! A 1lb block melted makes it easier to dip the wire circles, and will be enough for about 50 circles.
12. Once wax is melted completely, lay out your wax paper or butcher paper on the table next to the pan, and use tweezers or metal tongs to dip the circles into the hot wax. I use two sets of tweezers, one for each hand. Let the excess wax drip off a bit before you lay the heart (or circle), backside down, back onto the landing paper.
  1. Once wax is melted completely, lay out your wax paper or butcher paper on the table next to the pan, and use tweezers or metal tongs to dip the circles into the hot wax. I use two sets of tweezers, one for each hand. Let the excess wax drip off a bit before you lay the heart (or circle), backside down, back onto the landing paper.
13. Wait 30 seconds or so until the wax is cool enough to handle, then pick up the heart and gently roll the extra edge of the paper back onto the back side of the shape. Flip it over and it should all be smooth!
  1. Wait 30 seconds or so until the wax is cool enough to handle, then pick up the heart and gently roll the extra edge of the paper back onto the back side of the shape. Flip it over and it should all be smooth!
14. Time to hang the shapes in the window! Carefully poke a wire through the loop of the shape. and thread thin wire or ribbon, yarn, etc. through for hanging.
  1. Time to hang the shapes in the window! Carefully poke a wire through the loop of the shape. and thread thin wire or ribbon, yarn, etc. through for hanging.
  2. Some of the shapes can be hung on wire, and attached to the suction cup, and some can be attached to the hook of the suction cup directly
14. Time to hang the shapes in the window! Carefully poke a wire through the loop of the shape. and thread thin wire or ribbon, yarn, etc. through for hanging.14. Time to hang the shapes in the window! Carefully poke a wire through the loop of the shape. and thread thin wire or ribbon, yarn, etc. through for hanging.
15. Arrange the shapes onto the window however you like. If you’re using several circles, you may want to hide some of the suction cups behind some shapes for a cleaner look.
  1. Arrange the shapes onto the window however you like. If you’re using several circles, you may want to hide some of the suction cups behind some shapes for a cleaner look.

Viola! You just made some “installation art!” I hope you enjoy it as much as I do.

Thanks for reading, and I’m looking forward to seeing how it goes. Please post anything you make on Instagram and tag me at @juliejulieart, I’d love to connect and see what you make! And feel free to visit my juliejulie.co website to sign up for my newsletter and workshops (coming soon!) I also have a juliejulieart page on Facebook, and more how-to videos on my juliejulieart channel on YouTube

13video classes

Like this project? Take the course.

Your Printmaking Journey · Fall Edition: 13 artists, six weeks, lifetime access. Started October 18. $199, enroll anytime.

See the course
Shop this project

Everything from the store in this lesson

The three Gelli Arts® items Julie uses, $49.97 all in.

Add all 3 to cart

Project and photography by Julie Anderson for Gelli Arts®. First published on the Gelli Arts® blog in February 2021.

The course

Your Printmaking Journey · Fall Edition

Tania AhmedKim BloombergPhoebe GanderKim HerringeSusan CliftonJessica Russo ScherrGiovanna ZaraMary Beth ShawMaren OatesRobyn McClendonBirgit KoopsenJulia WoningStewart Taylor
13classes, six weeks

October 18 to November 28, 2026

13 artists teaching on video, lifetime access. $199, enroll anytime.

See the course
Shop this project$49.97See the kit