The Original Gel Plate · Est. 2011 · Made in the USANew: Holiday Card & Ornament Kit · $43.99Your Printmaking Journey · Fall Edition on now · enroll anytime
Birgit's finished prints with paint marker details
From the Gelli Arts® blog

Toilet Paper Tube Reliefs

with Birgit Koopsen
TechniqueGel printing with reliefs
You’ll makePatterned prints from toilet paper tube reliefs
LevelAll levels
Birgit's finished prints with paint marker detailsWatch
From the artist

Hi! Welcome to the Gelli Arts® blog, it’s Birgit here today with a fun new project with endless possibilities, creating beautiful reliefs using toilet paper or paper towel tubes.

Supply list
Birgit's materials laid out
Step-by-step

Follow along

Cut the strips

Cut the strips

  1. To create the reliefs you start by flattening the tubes, then cut them into strips of the same width. You connect them together in any place you like, creating fun designs.
Smaller shapes

Smaller shapes

  1. You can also fold the tube strips to create smaller, double shapes. Or cut them in half and close the open ends to create smaller single shapes.
Design the relief

Design the relief

  1. Vary with the placement of the smaller shapes, inside or outside of the bigger shapes. You can work symmetrical but don’t have to. Or connect several designs together to create a bigger, repeating, relief.
  2. Just use your imagination and move the shapes around to see how it looks before glueing them together.
  3. Note make sure to assemble the reliefs on a flat surface so all the strips are lined up at the bottom. It’s no problem if the strips are not the same height as long as one side is flat and even to make sure all the lines will touch the plate.
Design the reliefDesign the relief
Paint and press

Paint and press

  1. When you are satisfied with your design and you made sure all of the glue is dry (you don’t want the reliefs to fall apart while printing) you can roll out a even and thin layer of acrylic paint on your Gelli Arts® gel printing plate.
  2. Carefully place the relief on top and press it down. Be careful and try not to move the relief in the paint.
Pull the print

Pull the print

  1. Then remove the relief and let the paint dry before adding a pick up layer of acrylic paint. Place the paper on top and rub firmly. I prefer to leave the paper on the plate until everything is dry to make sure all the paint comes off.
Pull the printPull the print
Finish with markers

Finish with markers

  1. Now you have some beautiful patterned prints that can be used for instance as a base for cards or an art journal page, or maybe you want to print even more layers on top. But you can also use paint markers to add lines and dots and turn these prints into lovely little pieces of art that are ready to frame.

As I said, the possibilities are endless 🙂

I hope you enjoyed this project and we would love to see what you create, so please share and don’t forget to tag @gelliarts and use #gelliarts so we can find your posts!

Happy printing and have a lovely day! Make it colorful 🌈 🩷

Birgit

13video classes

Like this project? Take the course.

Your Printmaking Journey · Fall Edition: 13 artists, six weeks, lifetime access. Started October 18. $199, enroll anytime.

See the course
Shop this project

Everything from the store in this lesson

The three Gelli Arts® items Birgit uses, $59.97 all in.

Add all 3 to cart

Project and photography by Birgit Koopsen for Gelli Arts®. First published on the Gelli Arts® blog in August 2024.

The course

Your Printmaking Journey · Fall Edition

Tania AhmedKim BloombergPhoebe GanderKim HerringeSusan CliftonJessica Russo ScherrGiovanna ZaraMary Beth ShawMaren OatesRobyn McClendonBirgit KoopsenJulia WoningStewart Taylor
13classes, six weeks

October 18 to November 28, 2026

13 artists teaching on video, lifetime access. $199, enroll anytime.

See the course
Shop this project$59.97See the kit